The Directive for Monitoring the Impact of Sulphur Dust on Soils (2015) – FAQs web page is a companion page for the updated Directive.
It is intended to address operational questions from EPEA approval holders or their consultants, and may be periodically updated or
Frequently Asked Questions about the Directive for Monitoring the Impact of Sulphur Dust on Soils
1. What is the Directive for Monitoring the Impact of Sulphur Dust on Soils?
The Directive specifies regulatory requirements and provides professional guidance for monitoring
and mitigation of the impacts of sulphur dust on soils for those sulphur handling and processing facilities in
Alberta whose EPEA approvals have the foregoing requirements. The 2015 version of the Directive is
an update and replacement of its earlier version (AEW, 2011) and the Soil Monitoring Guidelines
under section II.C.3 and the Appendix A-7 of Government of Alberta’s 1989 Air Monitoring Directive.
2. What are the major changes in the 2015 version of the Directive relative to its 2011 version?
The Directive is a living document and subject to periodic revisions when new information becomes established.
The 2015 version of the Directive is released largely to implement new extraction and analytical methods developed
and validated in Alberta for determination of elemental sulphur in soils. This is necessary because work completed
over the last few years in Alberta indicated the chloroform extraction and HPLC method (Watkinson et al, 1987)
referenced in the 2011 version of the Directive was not suitable with the mainstream commercial laboratories in Alberta
for reasons outlined under Question 17.
Other minor revisions include the following:
- General information regarding policy roles of the Department and AEP;
- Requirements for landowner notifications before conducting the field work outlined in this Directive; and
- Some refinements in reporting formats to facilitate efficient regulatory reviews of monitoring or mitigation
proposals and reports, which are intended in the Directive.
3. When will the 2015 version of the Directive become effective?
The 2015 version of the Directive will come into force on January 1, 2016 in the following ways:
- For EPEA approvals that already have included the Directive for Monitoring the Impact of Sulphur Dust on Soils
(AEW, 2011) as amended, no change in approvals will be needed as the 2015 version will become effective
automatically on January 1, 2016;
- For EPEA approvals that still follow the Soil Monitoring Guidelines under Government of Alberta’s 1989 Air
Monitoring Directive, the approvals must be amended to reflect the changes in monitoring and mitigation requirements
as outlined in the Directive for Monitoring the Impact of Sulphur Dust on Soils (AEW, 2011) as amended. Prior to any
EPEA approval amendment, the approval holders may voluntarily use the 2015 version of the Directive, but they will
need to clarify the reporting requirements with the Director. In this case they must choose the 2015 version of the
Directive or remain with the 1989 Soil Monitoring Guidelines in their entirety - they cannot use both.
4. What kinds of industrial operations are required to conduct soil monitoring for the impact of sulphur dust on soils?
The EPEA approval holders that handle solid elemental sulphur and also have the requirements in their approvals to monitor
impacts of deposition of sulphur dust to soils, must conduct the soil monitoring program. Typically, these facilities handle
and process solid elemental sulphur using blocks, base pads, prilling towers, granulating facilities, loading/unloading
facilities, and/or store more than 100 tonnes of solid elemental sulphur.
5. If our plant only operates liquid elemental sulphur processing facilities, do we need to conduct soil monitoring for sulphur dust and its potential impact on soils?
Usually this is not required. Section 1.3 of the Directive has granted an exemption to this type of facility, provided that
any historical impacts to soils by solid elemental sulphur operation have been remediated to appropriate standards. EPEA
approval holders must follow the terms and conditions in their approvals.
6. When should our plant use this Directive or the 2009 Soil Monitoring Directive?
The Directive for Monitoring the Impact of Sulphur Dust on Soils (AEP, 2015) focuses on lands in the vicinity of plants
that handle solid elemental sulphur. It may also extend to selected locations within the boundary of a plant site when
the overall pattern of deposition of sulphur dust needs to be assessed. Monitoring for the release of sulphur to soils
within the plant boundary and releases of other substances to soils in general, is otherwise addressed by the Soil
Monitoring Directive (AENV, 2009), as amended, under the corresponding EPEA approvals.
Monitoring and Sampling
7. The Directive indicates that composite soil samples must be used in all monitoring events to address the potential impacts of sulphur dust. How should the sampling be carried out in the field?
A minimum of five separate soil samples must be collected within a five meter radius of a sampling location. The depth
intervals defined in section 22.214.171.124 of the Directive must be followed. The samples must be composited within each depth
interval for that location. Where it is possible, the composite samples should be mixed in the field.
8. When determining soil bulk density at each major sampling location, should our plant determine the bulk density of all sampling intervals at all five sub-locations within a five meter radius of a major sampling location?
Measurements of soil bulk density at one representative sub-location are adequate for the programs in the Directive. The
bulk density data must be determined for each of the specified depth intervals as outlined in section 126.96.36.199. As
measurements of soil bulk density can cause significant disturbance to a sampling location, it may not need to be measured
again in the subsequent soil monitoring and mitigation events, unless the site is disturbed by new construction or change
in land use.
9. Some of our clients have older plants and they did not have baseline soil data prior to the introduction of the 1989 Soil Monitoring Guidelines. Can they compare their soil monitoring data against those of the older background locations?
Yes. For some older plants where baseline soil data are not available, it is acceptable to use background locations as a
surrogate baseline, provided that the locations are not affected by plant operations and the soil types are the same as
the locations being monitored.
10. The Directive specifies a monitoring frequency of every other year, at a minimum. Our plant has just established a new operation which handles solid elemental sulphur. Can we conduct the Routine Monitoring Program on an annual basis so that we can understand the deposition patterns of sulphur dust faster?
Yes. The plant may conduct annual monitoring as needed but must follow the reporting frequencies in the EPEA approval.
11. Should we determine the exceedance of the operational threshold values by using the trends in the monitoring data over several years, or the most recent monitoring data?
In the Directive, impacts of sulphur dust to soils are defined by comparison of soil data from each monitoring event
against the operational threshold values in section 188.8.131.52. Considering the dynamic nature of soil acidification, the
most recent monitoring data should often give a more accurate assessment of the site. The trend in monitoring data will
help to estimate the rates of soil acidification, or, where a mitigation plan is implemented, the rates of soil recovery.
12. Regarding the threshold values for mitigation, could Alberta Environment and Parks clarify when to use the total sulphur analysis and when to use elemental sulphur analysis?
Alberta Environment and Parks has kept a set of operational thresholds with multiple parameters in section 3.2.3 of the
Directive. All of those parameters must be determined in a Routine Monitoring Program.
13. Some baseline soils at our monitoring areas are alkaline. If those soils require liming, should our plant mitigate the soils to a neutral condition, or the alkaline condition?
Where the soil has an alkaline baseline or background condition and the measured soil pH values in the Routine Monitoring
Program still remain above 6.5, the benefits of liming may be outweighed by an adverse effect on the availability of nutrients
to vegetation. Instead the Mitigation Program should focus on source control and protection of other sensitive ecosystem
components of the land. The proponents should contact the relevant AER or AEP staff members for
If the soil pH is below pH 6.5 for agricultural soil, or pH 5.0 for forest soils, liming is needed and the targeted pH should
be within the optimal range (pH 6.0-7.0 for agricultural soils, and pH 5.0-6.5 for forest soils) for nutrient uptake.
14. The 2015 version of the Directive requires some different analytical methods than its 2011 version and the 1989 Soil Monitoring Guidelines. Are the facilities with existing monitoring programs required to use the new methods? How can we accurately compare results using the old versus new methods?
The soil analytical methods are normally updated in about a 10-year period in scientific communities and improvements
are often adopted along the way. Laboratory procedures for soil analyses need to be updated to remain relevant, and all
relevant EPEA approval holders are required to use the new methods, or equivalent methods that are otherwise authorized
by the Director. One exception is explained under Question16 below.
In general, it is not anticipated that the updated methods will result in drastically different analytical results.
If a new laboratory method does produce distinctly different results with quality-control samples of known concentrations,
the laboratory may use the new method to either
- re-analyze any stored baseline samples, or
- analyze suitable background soil samples and use them as a surrogate baseline.
15. The 1989 Soil Monitoring Guidelines specifically stated that pH tests for organic soils and forest litter needed to be done at a 10:1 liquid to soil ratio whereas for mineral soils, a 2:1 ratio. Should we continue to use these ratios?
Yes. The above soil-specific ratios have been widely used in determination of soil pH and are cited in the references of
16. The Directive has specified the calcium chloride (CaCl2) method for determination of soil pH, can our plant use the water suspension method instead?
If the water suspension method has been consistently used by an EPEA approval holder to determine soil pH in previous
monitoring events, it should be followed in the future to get comparable data.
17. The 2015 version of the Directive referenced two new extraction-HPLC analysis methods and their standard operating protocols for determination of elemental sulphur in soils while the 2011 version specified a chloroform extraction and HPLC determination method by Watkinson et al. (1987). How should our laboratory deal with that problem?
The new extraction and analytical methods and their standard operating protocols referenced in the 2015 version of the
Directive should be used as they are recently developed to support this Directive and passed systematic validation
procedures for quality assurance and quality control in analytical laboratories. Laboratory evaluations of the chloroform
extraction-HPLC method by Watkinson et al. (1987), over the past three years in Alberta, indicated potential health concerns
about chloroform to laboratory operators. Use of alternative chemicals is preferred as chloroform is toxic and caused
damage to and leak from a HPLC equipment used to test that method.
18. The Directive cites both the acetic acid dissolution method and the carbon dioxide weight loss method for the determination of soil carbonates. Which method should we use for mineral soils and which for organic soils?
When mineral soils have a low carbonate content, the acetic acid method as modified by Ashworth (1997) works better.
When mineral soils have a high carbonate content (5% or more) the acetic acid dissolution method will no longer be sensitive
unless the amount of soil sample is markedly reduced. Alternatively, the carbon dioxide weight loss method can be used.
For organic soil samples, follow the carbon dioxide weight loss method because high amounts of organic matter can make the
acetic acid dissolution method inaccurate.
Updated: Jan 16, 2018